FPS Limiter Removal for Airsoft Sniper Rifles – Many BB Guns and airsoft rifles (sniper rifles) are now arriving with FPS limiters. There are several reasons why new airsoft sniper rifles now have this; one is due to legal provisions in force in Hong Kong that now state that all imported replicas must have a reduced muzzle velocity.
But don’t worry, we at Just BB Guns have got you covered. In order to increase muzzle velocity and increase FPS, simply follow these simple steps.
STEP ONE
Remove the barrel and trigger unit from the stock. If this is a new gun, it should already be separated from the stock.
STEP TWO
Pull out the metal pin that is in front of the trigger to release the bolt unit.
STEP THREE
Slide-out the bolt to expose the brass nozzle at the end.
STEP FOUR
With a flat head screwdriver, simply remove the reducer screw that is inside the nozzle (air tap)
STEP FIVE
Now reinsert the bolt and insert the metal pin (make sure that it is facing the same way it was before removing it in stage one!) Please be aware that if you are having issues sliding the bolt back in, then there may be a small catch at the bottom of the housing. With your screwdriver, simply push it back in to enable the bolt to be reinserted.
LOST PIN?
If you need to replace the FPS PIN at any time, you can buy a replacement from JBBG here –Â FPS Limiter PIN for Airsoft Rifles.
KNOWN MODELS THAT HAVE THIS FPS LIMITER
- WELL MB01
- WELL MB05
- WELL MB08
If you have any questions about this post, please contact our support team at Just BB Guns.
ABOUT JUST BB GUNS
You can see our full range of Airsoft Guns on the Just BB Guns category product pages. We also have many BBs and airsoft accessories, all at great low prices.
Just BB Guns: Trimex House, Pier Road, Feltham, TW14 0TW
Call us now: 0330 900 5224
E-mail Address: [email protected]
Website: www.justbbguns.co.uk