WE MBC 4 way Airsoft Charger

WE Europe MBC Balance Charger

NiMh / LiPo / LiFe / NiCd /MiMh / Pb

WE – MBC Balance Charger – NiMh/LiPo/LiFe/NiCd/MiMh/Pb is a heavy duty smart charger, designed to charge up to four batteries at once. The charger itself has been designed to be as easy to use as possible, and have a huge range of applications. The charger itself can charge most Airsoft batteries, ranging from NiMh, to LiPo and LiFe. The charger has a fan cooling system which keeps the charger cool whilst charging and is automatically activated and controlled by the internal temperature sensor. The charger itself can be powered by either a 12 Volt Car battery or from 120V-240V wall socket, making it great for either use at home or on the move. This charger is perfect for those who need to charge their batteries on the go, for example, it is perfect for Airsoft Sites who don’t have ready access to a 240V wall socket, or for Weekend Skirmishes or Mil-Sim players who may need to charge their batteries on the field.

Smart Charger:

• NiMh/LiPo/LiFe/Pb
• Charge 4 Batteries

Power Cables for the following connectors:

• Large Crocodile
• Small Crocodile
• 240V EU Plug
• EU Plug to 3 Pin UK Plug

Charger cables for the following connectors:

• XT60 (Male)
• Large Tamiya (Female)
• Small Tamiya (Female)
• Deans (Male)

–  The charger can be plugged into other batteries to charge others (Eg. Car Batteries as Power Supply)
– Can be used to Fast Charge, Balance, Discharge and prepare batteries for Storage
– Temperature Sensors
– Internal fan to keep the charger cool whilst charging
– Stops charging automatically when the batteries reach their Delta Peak
– Auto function to detect battery charge, preventing overcharging
– Storage mode for Lithium batteries
– Fast charge for Lithium batteries
– Up to 5 Charge / Discharge cycles
– Store up to 10 battery settings for later use
– Allows the charging of up to four batteries at once

Operating Levels:

• AC Input: 100-120V(360-330W)
• DC Input: 11-18V
• Charger Circuit Power: 4x50W (200W)
• Charge Current Range: 0.1A – 6.0A
• Discharge Current Rate: 0.1A – 2A
• Current Drain for balancing port: 200mAh per Cell
• NiCd/NiMH battery cell Count: 1-15 Cells
• LiPo/LiFe/Lilon Cell Count: 1-6 Cells
• Pb battery voltage: 2-20v
• Weight: 1.73kg
• Dimensions: 25.5cm x 17cmx 66cm

Package Includes:

• Charger Unit
• AC Power Cord
• DC Power Input Cable
• Plug-in battery clamps
• Crocodile clip charging cable
• Tamiya / Deans Charging Cable
• XT60 Charging Cable
• 18AWG Wire Charging cable

WARNING 

• Use special caution when working with Lipo battery packs, they are very sensitive to charging characteristics and may explode if mishandled.
• Make sure you have enough knowledge on Lipo rechargeable batteries in charging, discharging and assembly before use.
• Put the batteries in a fire-proof environment when charging.
• We recommend that you only charge when the battery is in a fireproof Lipo bag.
• Never leave batteries unattended when charging.
• Do not put batteries on the car seat, wood surface or carpet when charging.
• We are not responsible for any damage caused by misusing or mishandling, not for any damage caused by other Lipo batteries.
• Do not make any changes to the charger, charger accessories or connectors, as this might cause an electrical shortage, fire or over-heating during charging.

Before purchasing a battery or charger please read our important warning and disclaimer here.