Nuprol Multi Function LiPo/LiFe/NiMH/NiCD Charger

NUPROL MULTI-FUNCTION CHARGER NPC-04

This is the Nuprol Multi-Function smart charger, meaning that the charger automatically charges and then cuts off when the battery is full. The charger features a 3 LED display which displays to the user not only if the battery is charged, but if any problems have occurred during the charge. The charger is smart enough to detect any problems with the battery, such as short circuits from damaged wires as well as if the battery has too low of a voltage, and will deactivate itself to prevent any further damage. This charger is designed to work with standard UK plug sockets. The charger is complete with a 2 pin mains lead and a standard 3 pin UK plug lead.

This charger also features a LED 7 segment display which shows digitally what type of battery you’re charging, as well as the amount of charge remaining. This charger is for standard LiPo and NiMh battery, as well as other rarer types such as LiFe and NiCd batteries. What this charger does is also charge Lithium High Voltage batteries, also known as LiHV, which are used in RC Cars and Vehicles. This means that if you’re hobby cross you can use the one charger for both. The charger supports 2-4 cell LiPo, LiFe and LiHV batteries, and 4-8 cell NiMh and NiCd batteries.

SPECIFICATION

• AC Input 100-240V
• Charge Current 0.5A/1A/1.5A/2A
• Charge Current 2.5A/3A/3.5A/4A
• Output Power 30W max
• LiPo/LiFe/LiHv battery cell counts: 2-4s
• NiMH/NiCd battery cell counts: 4-8s

PACKAGE INCLUDES

• Nuprol Multi Charger
• Charging Harness to Deans
• Deans to Mini-Tamiya Converter
• Power Cable 2 Pin
• Power Cable 3 Pin

FEATURES

• NUPROL battery charger
• Intelligent Auto-Stop charger
• Charges almost every type of Airsoft battery
• Charges Li-Po, Li-Fe, Li-Hv, Ni-MH and Ni-Cd Batteries
• Smart charging system to detect problems safely
• Stops charging when the battery is full
• LED Text Display and LED info light
• An internal power supply system
• Comes with charging harness and connector adaptor
• Can be used with LiPo data connectors for Balance Charge
• Comes with Deans to Mini-Tamiya Converter
• Adjustable AMP output setting
• AMP adjustable to 0.5A – 4A in 0.5A increments
• 100v – 240v AC Input voltage
• Outputs a max of 30W

WARNING 

• Use special caution when working with Lipo battery packs, they are very sensitive to charging characteristics and may explode if mishandled.
• Make sure you have enough knowledge on Lipo rechargeable batteries in charging, discharging and assembly before use.
• Put the batteries in a fire-proof environment when charging.
• We recommend that you only charge when the battery is in a fireproof Lipo bag.
• Never leave batteries unattended when charging.
• Do not put batteries on the car seat, wood surface or carpet when charging.
• We are not responsible for any damage caused by misusing or mishandling, not for any damage caused by other Lipo batteries.
• Do not make any changes to the charger, charger accessories or connectors, as this might cause an electrical shortage, fire or over-heating during charging.

Before purchasing a battery or charger please read our important warning and disclaimer here.