BULLDOG ST MAMBA ST P1 AIRSOFT GUN
This is the BULLDOG ST MAMBA P1 electric airsoft gun, a PRO level AEG that has many great features not found on an airsoft rifle at this price. This AEG (electric gun) with high-quality motor and internal parts, metal bushings, adjustable hop-up for greater accuracy, Nylon receiver to reduce the weight and deliver a custom moulded grip, high-end steel gear set. The handguard on this gun is a Nylon mix with outstanding skeleton work that makes this gun the ultimate in airsoft.
BLACK PRO AEG
PAINTED BLUE 2 TONE
|POWER TYPE||ELECTRIC (2 STICK TYPE)|
|CONSTRUCTION||ABS / METAL / NYLON|
|MOTOR TYPE||LONG AXLE|
This outstanding Bulldog ST Mamba AEG has the latest features that make this one of the best airsoft guns for the money. A sportline gun that features an SRC 300 round high-cap magazine plus a smooth selector switch to change from safety to semi-auto and full-auto firing. It has a metal barrel and the SRC Hop-Up system. Other outstanding features include an adjustable tactical stock and quality detachable sights to enable installation of almost any red dot sight or scope.
This airsoft gun is complete with a 300 round SRC hi-cap magazine, simply fill the mag via the top trap door – only use high quality polished 6mm BB pellets such as Bulldog. Then wind the bottom wheel until you see the BBs appear at the top of the magazine. It is always a good idea to have more than one magazine fully loaded and ready!
This airsoft gun is electric and requires a rechargeable airsoft battery to fire – battery NOT included with this gun. We recommend using any of the Bulldog Airsoft pro battery packs to guarantee compatibility. Always charge using a pro airsoft charger that will stop when charging is complete. This gun is compatible with both 8.4V and 9.6V 1600 crane Bulldog Airsoft batteries.
The selector switch allows the shooter to change firing modes of the gun from safety to semi-auto and full-auto. The selector switch is located above the trigger and grip on the left-hand side of the gun’s receiver. It is located in this standard position to allow the shooter to select the firing mode with a simple flick of there thumb. For more info please see our video.
Hop-up devices apply backspin to the projectile reducing the air pressure on its top side. This causes the plastic pellet to fall less over a given distance than it would without the spin applied, extending the effective range of the weapon without increasing velocity. The HOP-UP on this airsoft gun is located behind the dust cover as normal but is not on a spring, so you will need to pull the dust cover down by hand to adjust hop-up.
IN THE BOX
Bulldog ST Mamba P1 Airsoft Gun
300 Round Magazine
Airsoft Rechargeable Battery (required)
Airsoft Battery Charger (required)
Quality Polished 6mm BB (required)
Eye Protection or Full Face Mask (required)