FPS Limiter Removal for Airsoft Sniper Rifles

Back to Blog
FPS Limiter Removal for Airsoft Sniper Rifles Blog at JBBG
Category: How To

Many airsoft rifles (sniper rifles) are now arriving with FPS limiters. There are several reasons why new airsoft sniper rifles now have this; one is due to legal provisions in force in Hong Kong that now state that all imported replicas must have a reduced muzzle velocity.

But don’t worry, we at Just BB Guns have got you covered. In order to increase muzzle velocity and increase FPS, simply follow these simple steps.


STEP ONE

Remove the barrel and trigger unit from the stock. If this is a new gun, it should already be separated from the stock.

STEP TWO

Pull out the metal pin that is in front of the trigger to release the bolt unit.

1 fps

STEP THREE

Slide-out the bolt to expose the brass nozzle at the end.

fps 2

STEP FOUR

With a flat head screwdriver, simply remove the reducer screw that is inside the nozzle (air tap)

fps 3

STEP FIVE

Now reinsert the bolt and insert the metal pin (make sure that it is facing the same way it was before removing it in stage one!) Please be aware; if you are having issues sliding the bolt back in, then there may be a small catch at the bottom of the housing. With your screwdriver, simply push it back in to enable the bolt to be reinserted.


KNOWN MODELS THAT HAVE THIS FPS LIMITER

  • WELL MB01
  • WELL MB05
  • WELL MB08

If you have any questions about this post, please contact our support team at Just BB Guns.


ABOUT JUST BB GUNS

You can see our full range of airsoft guns on the Just BB Guns category product pages. We also have many BBs and airsoft accessories, all at great low prices.

Just BB Guns: Trimex House, Pier Road, Feltham, TW14 0TW
Call us now: 0330 900 5224
E-mail Address: [email protected]
Website: www.justbbguns.co.uk

 

Share this post

Back to Blog